<p>waterproof dead ends, wall joints between the ground and the water pipes and the ground at the seams, is the most prone to problems. 5, after the construction of the bathroom waterproof layer, all the sewers in the bathroom blocked in the doorway to build a 25cm high ridge, and then poured into the bathroom 20cm high water. 6,24 hours later, check the surrounding walls and the ground with or without leakage phenomenon, if there is leakage need timely repair, repair and then do 24 hours water test leakage before entering </p>
<p>the next stage of construction. 7, after the completion of shielding test, it usually takes 5-7 days (waterproof coating to form a waterproof film takes 5 to 7 days), in the waterproof coating layer to do a layer of cement mortar protective layer, a waterproof coating Layer to protect the use of, and secondly, to facilitate the tile, careful not to damage the waterproof coating has been done. 8, and other protective layer of cement mortar dry, you can pave the floor in the above tiles or spray paint or paving anti-wallpaper, for the </p>
<p>normal decoration. Postscript: home Xiaobian here for everyone to share a small waterproof toilet coup, I hope to help you decorate the design. As long as we follow Xiaobian said the toilet precautions, then the bathroom will be quite good waterproof. Although it does not leak but also almost the same. Toilet water we must pay attention to Oh.
Wall hollowing, cracking, falling off, is a common problem in many newly renovated rooms, what is the reason, so that the original white walls have flaws! Below every family Xiaobian </p>
<p>
joist spacing for plastic decking<br />
load bearing capacity of wpc composite panels<br />
how much for composite white fence cost</p>
