Bienvenido! Entrar Crear un nuevo perfil

Avanzado

Corresponding measures for flooding of wood floor

Enviado por qizhenapp 
Corresponding measures for flooding of wood floor
04-November-2017 12:40
<P>1, for the water is not serious wood flooring, in addition to the shortest possible time to dry the surface water, the small area of ​​the vacuum cleaner can be used in the bubble floor of the floor of the splicing gap suction water vapor, or with a dryer with cold air dry, but thousands Do not use hot air blowing,outdoor plastic coated decking to prevent the surface due to heat drying caused by dry deformation. Soaked area is relatively large, can be considered to use air conditioning to dehumidification, close the room doors and windows, air conditioning open to the lowest temperature, most of the day or so to dry.</P>
<P>2, if the wood floor water is serious, it is necessary to keep the floor is not deformed in the case of dry, conditional circumstances,how to screw composite decking in the clean-up site at the same time, it is best to inform the floor manufacturers professional customer service door processing. Because of the different materials, solid wood flooring and laminate flooring by water immersion treatment is also a slight gap.</P>
<P>3, if the solid wood flooring a large area soaked in water, should promptly notify the wood floor after-sales service, the wooden floor carefully pry, but also as soon as possible to the floor surface of the water dry, and then '' well '' shape superposition,plastic wood decking cost germiston The weight produced by the stack prevents the occurrence of deformation. In the placement should pay attention to the floor upside down to prevent the surface due to rapid drying caused by dry, and attention can not be placed under the sun exposure, it should be placed in the ventilation at the dry, one to two weeks after its recovery, Decide whether it can be used again.</P>
<P>4, if the floor soaked time not more than 12 hours, the furniture can be removed on the floor, try not to pressure, and quickly drain the surface water, such as dry wipes with the surface of the floor water all dry. And then quickly remove the floor of the baseboard,exterior grade insulated wall panels exposing the expansion joints, by the expansion of the water vapor will be distributed, usually about a week dry, good quality or immersion time is not long products can be self-recovery. If a small area of ​​laminate flooring soak for too long, the floor material expansion coefficient is too large, certainly difficult to restore, you can use local replacement way to solve, that is prying after the re-purchase with the brand, the same type of floor pavement.</P>
Lo siento, sólo pueden enviar mensajes si está registrado.

Picar aquí para entrar